back to top

How do I use the chronograph?

You must first select the chronograph function on your AlpinerX watch. Press several times on the 3 o'clock pusher to get to the chrono function. By pushing the 4 o'clock pusher you can select the mode for intermediate times (Split or Lap).

The chronograph is started and stopped by pressing the 2 o'clock pusher. It is reset to 0 by pressing the 4 o'clock pusher, when the chrono is stopped.

When the chrono runs, pressing the 4 o'clock pusher will freeze for 10 seconds the intermediate time.

Count-up/down counters are started and stopped the same way.

back to top

What are Split and Lap?

In Split mode, the intermediate time gives the time since the start of the chrono (split time).

In Lap mode, the intermediate time gives the time since the last 4 o'clock push (lap time).

back to top

How can I set the count-up/down counter?

The count-up/down values can be set in the application in "my watch", "set count up/countdown".

back to top

How can I set the count-up/down counter?

You can set up a target time or countdown directly from your watch without having to go through the AlpinerX application. Simply follow these quick steps:

1. Press the pusher at 2 o'clock for 3 seconds to set up the target time

2. Press the pusher at 2 o'clock (+) or the pusher at 4 o'clock (-) to adjust the blinking field (HH:MM:SS)

3. Press the pusher at 3 o'clock to switch fields: HH -> MM -> SS -> and set the new target time